by CNHReman | Jul 23, 2024 | Bulletins
(DC24-475)From July 22, 2024 through August 31, 2024, CNH Reman will offer a 5% discount on a wide range of in-demand reman parts, including: Driveline Electronics Engine components Fuel Hydraulics Turbos Benefits for Your Dealership: Reduced Cost &...
by CNHReman | Jun 27, 2024 | Bulletins, Product Improvement
Solution Date: 4/9/2024 Serial Number Break: 241010001 Problem: The engine will develop a knock and/or rocker arm failures. Root Cause: Cam bushings were not properly aligned to allow proper oil flow to the rockers. Solution: Cam bushing installation process...
by CNHReman | Jun 26, 2024 | Bulletins, Product Improvement
Solution Date: 12/1/2022 Serial Number Break: 223360001 Problem: Engine can derate and go into limp mode or show Fault Codes 19077, 193337 Root Cause: The flutter membrane in the older version modules would harden and not operate properly in below freezing...
by CNHReman | Jun 26, 2024 | Bulletins, Product Improvement
Problem: AC compressor making noise Solution Date: 5/30/2024 Serial Number Break: NA Failure Mode: AC compressor cores are coming back with two different types of dust shields on them. Root Cause: The older dust shields (shown below on the right), are...
by CNHReman | May 8, 2024 | Aeromotive, Bulletins
(DC24-200) The Wire Harness Internal Parts Swap (WHIPS) program empowers dealers to repair a specific section of a wire harness, eliminating the need to remove, replace, or repair the entire assembly. This initiative is designed to revolutionize the way dealerships...
