by CNHReman | Jul 23, 2024 | Bulletins
(DC24-475)From July 22, 2024 through August 31, 2024, CNH Reman will offer a 5% discount on a wide range of in-demand reman parts, including: Driveline Electronics Engine components Fuel Hydraulics Turbos Benefits for Your Dealership: Reduced Cost &...
by CNHReman | Jun 27, 2024 | Bulletins, Product Improvement
Solution Date: 4/9/2024 Serial Number Break: 241010001 Problem: The engine will develop a knock and/or rocker arm failures. Root Cause: Cam bushings were not properly aligned to allow proper oil flow to the rockers. Solution: Cam bushing installation process...
by CNHReman | Jun 26, 2024 | Bulletins, Product Improvement
Solution Date: 12/1/2022 Serial Number Break: 223360001 Problem: Engine can derate and go into limp mode or show Fault Codes 19077, 193337 Root Cause: The flutter membrane in the older version modules would harden and not operate properly in below freezing...
by CNHReman | Jun 26, 2024 | Bulletins, Product Improvement
Problem: AC compressor making noise Solution Date: 5/30/2024 Serial Number Break: NA Failure Mode: AC compressor cores are coming back with two different types of dust shields on them. Root Cause: The older dust shields (shown below on the right), are...
by CNHReman | May 8, 2024 | Aeromotive, Bulletins
(DC24-200) The Wire Harness Internal Parts Swap (WHIPS) program empowers dealers to repair a specific section of a wire harness, eliminating the need to remove, replace, or repair the entire assembly. This initiative is designed to revolutionize the way dealerships...
by CNHReman | May 6, 2024 | Bulletins
(DC24-406)Regular maintenance on combine wear parts can help prevent costly breakdowns and repairs. By proactively identifying and replacing worn or damaged wear parts, customers can ensure optimal performance and efficiency during harvesting operations. Safeguarding...
